Internal

BI2MR22 - Medical Robotics and Prosthetics

BI2MR22-Medical Robotics and Prosthetics

Module Provider: School of Biological Sciences
Number of credits: 20 [10 ECTS credits]
Level:5
Terms in which taught: Autumn / Spring term module
Pre-requisites:
Non-modular pre-requisites:
Co-requisites:
Modules excluded:
Current from: 2022/3

Module Convenor: Prof William Harwin
Email: w.s.harwin@reading.ac.uk

Module Co-convenor: Dr Yoshikatsu Hayashi
Email: y.hayashi@reading.ac.uk

Type of module:

Summary module description:

This module considers innovation and design in the areas of prosthetics, robotics, exosketons, medical equipment etc to help humans and animals. The module will explore current state of the art, and the techniques needed to innovate and invent new devices and methods. The course will also look at the foundational maths that guides the movement of robots and people.


Aims:


  • To introduce students problems in providing functional prosthetic, robotics, exoskeleton and medical equipment (e.g. surgical robotics) for medical and rehabilitation applications.

  • To give students hands on experience, and fundamental underpinnings in, prosthetics, orthotics and robotics and complex medical equipment .  To give students an appreciation of the engineering across these domains. 

  • To ensure students can understand basic principles of forces, torques and joints as applied to humans, animals and mechanisms. 

  • To expose students to how matrix methods can be used to define the equation of motion of robots, humans and animals

  • To encourage students to research new ideas and demonstrate functional solutions.


Assessable learning outcomes:

Students should be able to:




  • articulate mechanical and engineering design principles needed to create new devices, robots and orthotics.

  • describe in detail specific examples of robotics and advanced in areas such as prosthetics, orthotics, robotics, medical equipment, assistive devices, surgical robotics and  more general industrial application areas.

  • understand and demonstrate both theoretical and physical solutions in a specific problem area.

  • appreciate the wealth of literature and use this literature to justify their approach.


Additional outcomes:

Students will understand more about engineering design and the interplay between group solutions and individual contributions. Students will also learn a range of tools and techniques that can be applied across a range of problems.


Outline content:

Topics covered will include engineering design methods, Engineering materials and their performance, computer aided design, rapid prototyping techniques, free-form-fabrication methods, passive joints, active joints (i.e. motors and actuators), structures, sensing and control. 



Students will be encouraged to research a range of topics such as legged machines, intelligent upper limb and lower limb prosthetics, assessment of technologies (e.g. Cybathlon), surgical robotics, haptics in rehabilitation, transcutaneous implants, implanted mechanisms and sensors etc.


Brief description of teaching and learning methods:

Lectures and open laboratories.


Contact hours:
  Autumn Spring Summer
Lectures 10 10
Project Supervision 2 2
Demonstration 3 3
Supervised time in studio/workshop 20 20
Guided independent study:      
    Wider reading (independent) 10 10
    Peer assisted learning 25 5
    Preparation for presentations 10
    Preparation of practical report 13
    Completion of formative assessment tasks 12
    Carry-out research project 20 25
       
Total hours by term 100 100 0
       
Total hours for module 200

Summative Assessment Methods:
Method Percentage
Written assignment including essay 30
Portfolio 60
Oral assessment and presentation 10

Summative assessment- Examinations:

N/A


Summative assessment- Coursework and in-class tests:

1 Portfolio (due end of Spring term)

1 Report (due beginning of summer term)

1 Presentation (due end of Autumn term)


Formative assessment methods:

Continuous during practical classes.


Penalties for late submission:

The Support Centres will apply the following penalties for work submitted late:

  • where the piece of work is submitted after the original deadline (or any formally agreed extension to the deadline): 10% of the total marks available for that piece of work will be deducted from the mark for each working day (or part thereof) following the deadline up to a total of five working days;
  • where the piece of work is submitted more than five working days after the original deadline (or any formally agreed extension to the deadline): a mark of zero will be recorded.
The University policy statement on penalties for late submission can be found at: https://www.reading.ac.uk/cqsd/-/media/project/functions/cqsd/documents/cqsd-old-site-documents/penaltiesforlatesubmission.pdf
You are strongly advised to ensure that coursework is submitted by the relevant deadline. You should note that it is advisable to submit work in an unfinished state rather than to fail to submit any work.

Assessment requirements for a pass:

40%


Reassessment arrangements:

Resubmission of portfolio and report.


Additional Costs (specified where applicable):

1) Required text books:  

2) Specialist equipment or materials:  £20

3) Specialist clothing, footwear or headgear:  

4) Printing and binding:  

5) Computers and devices with a particular specification: Graphical laptop optional

6) Travel, accommodation and subsistence:  


Last updated: 22 September 2022

THE INFORMATION CONTAINED IN THIS MODULE DESCRIPTION DOES NOT FORM ANY PART OF A STUDENT'S CONTRACT.

Things to do now