Objektnummer
58/163
Ophav
Beskrivelse
This is a stonemason's claw tool for use on very abrasive stone where an ordinary chisel or bolster would soon wear out. It consists of an iron shank with a slot into which a toothed blade is inserted - when the teeth wear out, the blade can be removed and replaced. This claw tool was made by J. G. Faulds and Co. of Glasgow, and has a blade 0.4 inches wide. It is one of a collection of stonemasonry tools used by Mr Ben Hingston, a London stonemason who stopped working in the practical side of the trade in 1958.
Fysisk beskrivelse
1 claw tool: iron
Arkivhistorik
MERL 'Catalogue index' card – ‘The claw tool is a narrow-bladed example, 0.4” wide and 8.5” long. It is stamped ‘J. C. Fauls [sic] & Co., patent, Glasgow. No. 1.’ (See 58/162)., MERL 'Catalogue index' card 58/162 – ‘On highly abrasive stone, chisels and bolsters would soon wear out with constant use and, as an alternative, the claw tool was patented by the well-known Glasgow tool manufacturers, Fauls [Faulds]. This consists of an iron shank, similar in shape to the bolster, but, instead of having a blade, it has a slot on its lower surface. A blade, consists of a number of teeth can be inserted into this slot, and when the teeth wear out the blade is thrown away.’, MERL ‘Associated information’ form – ‘All the tools in this collection were used by Mr Hingston, a 45 year old (approx [in] 1958) mason. Many of them he obtained from other craftsmen and many he bought new. A mason very rarely possesses all the tools that he requires, for borrowing from a fellow worker is a common practice in the trade. There are 3 categories of tools in this collection. (1) Those used for hard stone, e.g. Portland (2) Marble tools (3) Soft stone (eg. Bath & Caen) stone. // In addition a craftsman usually carries all kinds of odd pieces of iron, of carborundum, blocks of wood which may be useful to him. // Hingston is now employed on the costing side of the trade (passed City & Guilds exam) & has ceased to be a practising craftsman. He has worked in these[?] counties[?] – Abingdon, Eton College Chapel, Windsor & marble works in Lambeth.’, Letter, Ben Hingston to MERL, 7 August 1958 – ‘… I have a fairly comprehensive kit of Stone Mason’s tools which I do not expect to use again, and if by chance you want them I shall be pleased to hear from you. // I have been a stone mason for some years but having just passed my Higher National Certificate I have got a much better job in a professional office. I could sell my tools, or give them away, or keep them. In fact I have parted with a few of the more unusual ones to three apprentices, and in the course of time the whole lot will just disperse. // There is a large set of Portland stone tools, a small but adequate set of Soft stone tools, a few Hard stone tools, a small set of carving a latter-cutting tools, a complete marble polishing kit, and some of the stone fixing tools; also sundry oddments, like a Mosaic hammer, and an old Saw-setting hammer. The tools are all genuine, and mainly contemporary…’
Produktionssted
Glasgow
Objektnavn
Materiale
Eksternt dokument
- L:\MERL\Objects\JISC 2012\60 series negatives\60_3172.tif - High resolution image